| Customization: | Available |
|---|---|
| After-sales Service: | Supported |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 400/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Configuration | Origin | ||||
| Spindle and guide bush bearing | Japan NSK, Germany-FAG | ||||
| Guide rail | Japan THK,Sweden-SKF,Taiwan PMI ,Taiwan HIWIN | ||||
| Guide screw | Taiwan PMI ,Taiwan HIWIN | ||||
| Elextrical components | France-Schneider,Japan IDEC | ||||
| Relay | Japan IDEC | ||||
| Pneumatic system | Taiwan AirTAC, Japan SMC |
Features:
*Each axis equipped with imported high-precision linear guide,ball screws and precise bearings.
* Using synchronous guide bush structure,realize high-speed and high-precision machining.
* With guide bush or without guide bush switching flexiblely to meet different needs of processing.
* Key components with gas sealing structure, oil and slag prevention, improving service life and stability.
* Select high torque motor, high rigidity and high strength slipway for each axis and tool holder to meet the requirements of large cutting volume and high efficiency.
* High scalability, tool quantities matched with different requirements of processing, reaching great cost-effective.
* Available with ER20 tools to increase the machining range.
Optional configuration
* Non guide bush
* MITSUBISHI numerical control system
* FANUC numerical control system
* High pressure pump
* Oil mist collector
* Y2 tool holder
* Chip conveyor
* Long workpiece collector
| Model | TC265M-1 | TC265M-2 | TC265M-3 | TC265M-4 | ||
| 5-axis,dual spindle | 5-axis,dual spindle | 5-axis,dual spindle | 5-axis,dual spindle | |||
| NC system | SYNTEC 220TB | SYNTEC 220TB | SYNTEC 220TB | SYNTEC 220TB | ||
| Lathe rated power | kw | 16 | 16 | 16 | 16 | |
| Machining range | ||||||
| Maximum machining diameter | mm | φ26 | φ26 | φ26 | φ26 | |
| Maximum machining length (one-time clamping)With guide bush | mm | 310 | 310 | 310 | 310 | |
| Maximum machining length (one-timeclamping)Non guide bush | mm | 2D | 2D | 2D | 2D | |
| Main spindle power | kw | 4.4 | 4.4 | 4.4 | 4.4 | |
| Sub spindle power | kw | 3 | 3 | 3 | 3 | |
| Main spindle max through hole dia | mm | φ28 | φ28 | φ28 | φ28 | |
| Main/sub spindle rev speed | rpm | 6000/6000 | 6000/6000 | 6000/6000 | 6000/6000 | |
| Sub spindle max clamping dia | mm | φ26 | φ26 | φ26 | φ26 | |
| Sub spindle max through hole dia | mm | φ28 | φ28 | φ28 | φ28 | |
| Max tool installed qty | 19 | 21 | 21 | 23 | ||
| OD Turning tool | ||||||
| Qty x Model | mm | 6*φ16 | 6*φ16 | 6*φ16 | 6*φ16 | |
| Cross live tool | ||||||
| Cross live tool | mm | 3*ER16+1*ER20 | 3*ER16+1*ER20 | 3*ER16+1*ER20 | 3*ER16+1*ER20 | |
| Drilling dia | mm | φ13 | φ13 | φ13 | φ13 | |
| Tapping/Threading die dia | mm | M8 | M8 | M8 | M8 | |
| Live tool rev speed | rpm | 5500 | 5500 | 5500 | 5500 | |
| Live tool power | kw | 1 | 1 | 1 | 1 | |
| End -face tool (Mainspindle) | ||||||
| Fixed | Qty x Model | mm | 5*ER20 | 5*ER20 | 4*ER20 | 4*ER20 |
| Drilling dia | mm | φ13 | φ13 | φ13 | φ13 | |
| Tapping/Threading die dia | mm | M10 | M10 | M10 | M10 | |
| Live | Qty x Model | mm | -- | -- | 3*ER16 | 3*ER16 |
| Drilling dia | mm | -- | -- | φ10 | φ10 | |
| Tapping/Threading die dia | -- | -- | M6 | M6 | ||
| Live tool rev speed | mm | -- | -- | 5500 | 5500 | |
| Live tool power | kw | -- | -- | 0.75 | 0.75 | |
| Back end-face tool(Sub spindle) | ||||||
| Fixed | Qty x Model | mm | 4*ER20 | 4*ER16 | 4*ER20 | 4*ER16 |
| Drilling dia | mm | φ13 | φ10 | φ13 | φ10 | |
| Tapping/Threading die dia | mm | M10 | M8 | M10 | M8 | |
| End face live tool | mm | -- | 2*ER16 | -- | 2*ER16 | |
| Side- Live tool | mm | -- | -- | -- | -- | |
| Drilling dia | mm | -- | φ10 | -- | φ10 | |
| Tapping/Threading die dia | mm | -- | M6 | -- | M6 | |
| Live tool rev speed | mm | -- | 5500 | -- | 5500 | |
| Live tool power | kw | -- | 1 | -- | 1 | |
| Rapid feed speed | m/min | 18(X1/Y2) 24(X2/Y1/Z1/Z2) |
18(X1/Y2) 24(X2/Y1/Z1/Z2) |
18(X1/Y2) 24(X2/Y1/Z1/Z2) |
18(X1/Y2) 24(X2/Y1/Z1/Z2) |
|
| Feed motor power | kw | 1 | 1 | 1 | 1 | |
| The power capacity | kva | 16 | 16 | 16 | 16 | |
| Air pressure device | mpa | 0.6 | 0.6 | 0.6 | 0.6 | |
| Weight | kg | 3700 | 3700 | 3700 | 3700 | |
| Dimensions L*W*H | mm | 2550*1500*1900 | 2550*1500*1900 | 2550*1500*1900 | 2550*1500*1900 | |
1.High quality/Safe material/Competitive price
2.Reliable Trademark Company.
3.Gold Member and Audited Suppliers in Made-in-China.
4.CE approved and One year warranty, provide whole-life technology support.
5.Quickly response and Small order available.
6.Customized Machine According to Customer's Requirement.
7.Our ultimate goal is "create value for customers,and insist on win-win road with users".
8.More details please contact us, or send your drawings of profiles,will give you professional recommendation.
1.What's the main products of your company?
A: We specialized in Swiss-type CNC lathes for small, complex, precision metal parts processing.
2.What CNC system do you use?
A:FANUC, SIEMENS, MITSUBISHI, SYNTEC, HCN .It depends on your choice.
3.How can I choose the most suitable machines?
A:Send us the products drawings and applications ,we will choose the most suitable machines for you.
4.What is your leading time?
A:Generally speaking, 1-3 month based on different quantity.
5.What's the Payment Terms?
A: Our practice is T/T ,30% deposite ,70% balance before shipment.
6.What's the shipment Terms?
A: By sea, by train, by truck, by air(metal parts samples).
7.What's the offering Terms?
A:EXW/Shenzhen, FOB/Shenzhen, CIF/Shenzhen, CFR/shenzhen.
8.Where is your factory located? How can I visit there?
A :Our company is located at Building A#, Xinhui industrial park, Tangtou, Shiyan, Baoan, Shenzhen, Guangdong, CN. We are warmly welcomed to visit us.
){kind=link}